The planning machine is mainly used for planing large workpieces. It can also clamp multiple parts on the workbench for simultaneous processing. It is an industrial master machine. The worktable of the gantry planer carries the workpiece through the portal frame for linear reciprocating motion, and the idle stroke speed is greater than the working stroke speed. There are generally two vertical tool rests installed on the cross beam. The slide of the tool rest can rotate at an angle in the vertical plane and can make lateral feed motion along the cross beam. Our factory is mainly used for processing columns and cross arms of electric furnaces.

CNC lathe is one of the most widely used CNC machine tools. It is mainly used for cutting internal and external cylindrical surfaces of shaft parts or disk parts, internal and external conical surfaces with any cone angle, complex rotating internal and external curved surfaces, and cylindrical and conical threads. It can also perform grooving, drilling, reaming, and reaming. Holes and borings, etc.

Laser cutting uses an invisible beam to replace the traditional mechanical knife. It has the characteristics of high precision, fast cutting, not limited to cutting pattern restrictions, automatic typesetting to save materials, smooth incision, and low processing cost. It will gradually improve or replace Traditional metal cutting process equipment. The mechanical part of the laser head has no contact with the workpiece, and will not cause scratches on the surface of the workpiece during work; the laser cutting speed is fast, the incision is smooth and flat, and generally does not require subsequent processing; the cutting heat-affected zone is small, the plate deformation is small, and the cutting slit is narrow ( 0.1mm~0.3mm); the incision has no mechanical stress and no shearing burrs; the processing accuracy is high, the repeatability is good, and the material surface is not damaged; CNC programming can process any plan view, and can cut the entire board with a large format, without Open the mold.

The automatic welding machine is a highly automated machine.

Lorem ipsum dolor sit amet consectetur adipisicing elit. Officia, laborum cumque dignissimos quidem atque et eligendi aperiam voluptates beatae maxime.